耐介电强度击穿试验仪

耐介电强度击穿试验仪产品特点

1、运行于WIN  XP/WIN7/WIN8系统下的独立安装软件，界面友好，操作简单

2、实验显示曲线，数据自动储存，自动查找

3、多种用途可以进行交、直流试验试验准确、可靠、安全

4、计算机控制试验过程，自动判断停止，自动复位

5、超压、过流、短路、漏电、误操作等多种保护

耐介电强度击穿试验仪满足标准：

GB1408-2006 GB/T1695-2005 GB/T3333  HG/T3330 /GB12656 /ASTM D149 .

      GB1408-2006 绝缘材料电气强度试验

      GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验

      GB/T3333 电缆纸工频电压击穿试验

      HG/T 3330绝缘漆漆膜击穿强度测定

      GB12656 电容器纸工频电压击穿试验

       ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度试验

主机尺寸：长宽高-800*700*1600（MM）

操作台尺寸：长宽高-800*700*650（MM）

防护罩材质：白色透明有机玻璃

油槽尺寸：长宽高-300*200*150

设备重量：约100KG

技术指标：

01、输入电压： 交流 220 V

02、输出电压： 交流 0--100 KV ;

               直流 0—100 KV

03、电器容量： 10KVA

04、高压分级： 0-100KV

05、升压速率：0.01-5.0kv

              （备注：满足标准要求并可以根据用户需求设定不同的升压速率）

注意事项：

●本仪器试验过程中如空气相对湿度大于70%，两电极间空气放电的距离会增加很多，所以试验中请与仪器保持1.2米的距离。

●本仪器之控制计算机专为电压击穿试验机设计，请勿随意添加和删除程序或移作它用。

●本公司保留对设备改进的权利，并不另行通知用户。

安全保护功能：

◆ 试验在试验箱中进行，试验箱门打开时电源加不到高压变压器输入端，即高压侧无电压。

100KV测试设备高压电极距离试验箱壁的zui近距离大于370mm，50KV测试设备高压电极距离试验箱壁的zui近距离大于250mm，试验时即使人接触箱壁也不会有危险。

◆ 设备要安装单独的保护地线。

接保护地线，主要是减少试样击穿时对周围产生的较强的电磁干扰。也可避免控制计算机失控。

◆ 该试验设备的电路设有多项保护措施，

主要有：过流保护、失压保护、漏电保护、短路保护、直流试验放电报警等。

◆直流试验放电报警功能:在设备做完直流试验时,当开启试验门时设备会自动报警,直至使用设备上的放电装置放电后报警会自动取消.

(注：因为直流试验后不放电会危险到人身安全,不能直接拿取电极,起到提醒使用人员放电以免造成人身伤害)。

◆ 试验放电装置，随主机为一体化，改进了以往单独配备一根放电杆的功能。

Product features

1, run on Windows XP/Windows 7 / doing under the system of independent software installation, friendly interface, easy to operate

2, experiments show that curve, data storage automatically, automatic search

3, a variety of utility can be ac and dc test experiment was carried out accurate, reliable and safe

4, the computer control test process, automatic stop, automatic reset

5, overpressure, over current, short circuit, leakage, wrong operation and so on the many kinds of protection

Dielectric breakdown strength tester meet standard:

GB1408-2006 GB/T1695-2005 GB/T3333 HG/T3330 / GB12656 / ASTM D149.

Insulation dielectric strength test GB1408-2006

GB/T1695-2005 rubber breakdown strength and power frequency voltage withstand voltage strength test

GB/T3333 cable ZhiGong frequency voltage breakdown test

HG/T 3330 insulating varnish film breakdown strength measurement

GB12656 ZhiGong frequency capacitor voltage breakdown test

ASTM D149 solid electrical insulating materials in the industrial power frequency of dielectric breakdown voltage and dielectric strength test

Host size: dimensions - 800 * 700 * 700 (MM)

Work station size: dimensions - 800 * 700 * 700 (MM)

Shield material: white transparent organic glass

Tank size: dimensions - 300 * 200 * 150

Weight: about 100 kg

Dielectric breakdown strength tester technical indicators:

01, input voltage: ac 220 V

02, output voltage: communication 0-100 KV;

Dc 0-100 KV

03, electric capacity: 10 kva

04, high-pressure sizing: 0-100 kv

05, pressure rise rate: 0.01 to 5.0 kv

(note: meet the standard requirements and can be set according to user requirements of different rate of pressure rise)

Dielectric breakdown strength tester to note:

When the instrument test such as air relative humidity is more than 70%, in the process of air discharge distance between two electrodes increases a lot, so test instrument to keep a distance of 1.2 meters.

When the instrument is specially designed for the control of computer breakdown voltage tester design, please do not add and remove programs or for it.

The company reserves the right to equipment improvement, did not notice the user.

Dielectric breakdown strength tester safety protection function:

In pieces in the test chamber test, the power supply when the door is open and not high voltage transformer input, namely high side no voltage.

100 kv testing device of high voltage electrode distance test chamber wall recent distance is greater than 370 mm, 50 kv testing device of high voltage electrode distance test chamber wall recent distance is greater than 250 mm, test even if people touch the walls of the danger.

Mixer equipment to install a separate ground protection.

Protection earthed, mainly is to reduce the sample breakdown when the strong electromagnetic interference on around. Also can avoid the control computer is out of control.

Pieces of the test equipment circuit is equipped with a number of protective measures,

Mainly include: over-current protection, loss of pressure protection, leakage protection, short circuit protection, dc test discharge alarm, etc.

Dc test discharge alarm function: when the dc test equipment to finish, when open the test device will automatically alarm, until the use of the discharge device on the equipment alarm will be automatically cancelled after discharge.

(note: because the dc test after discharge will be dangerous to personal safety, can not directly take electrode, a reminder to use personnel discharge so as not to cause personal injury).

Discharge test device, with the integration to the host, improve the function with separate ever put a pole.